Pay-off machines
The machines are designed for unwinding cable products from coils and drums with the maintenance of tension and speed.
| Unwinding speed, m/min | 200 |
| Drum diameter, mm | 1200 - 4000 |
| Drum weight with cable, kg | under 30000 |
Maximum load capacity; traversing movement with the drum.
| Unwinding speed, m/min | 400 |
| Drum diameter, mm | 400 - 2200 |
| Drum weight with cable, kg | under 7000 |
Wide range of drum diameters; convenient installation of the drum on the machine.
| Drum diameter, mm | 500 - 800 |
| Drum weight with cable, kg | under 1200 |
| Unwinding speed, m/min | 500 |
High unwinding speed; resistance to high dynamic stresses.
| Type | Axial |
| Drum diameter, mm | 500 - 630 |
| Drum weight with cable max, kg | 300 |
| Unwinding speed, m/min | 300 |
The device is designed to work in the composition of double-twist machines, extrusion and other lines. Carries out the unwinding from the drum and maintains the specified tension.
| Type | pintle, no drive |
| Drum diameter, mm | 630 |
| Drum weight, kg | 450 |
| Unwinding speed, m/min | 300 |
| Tension force, N | 30 - 360 |
Automatic tension control; Mechanical lifting and clamping of the drum; Pneumatic disc brake.
| Type | pintle |
| Drum diameter, mm | 630 |
| Drum weight, kg | 475 |
| Unwinding speed, m/min | 100 |
| Tension force, N | 4 - 50 |
This machine is designed for unwinding cables from the drum in the technological lines of the cable production. Unwinding speed is set using the control system. Constant tension provides a compensator.
| Type | pintle |
| Drum diameter, mm | 500 |
| Drum weight, kg | 50 |
| Unwinding speed, m/min | 100 |
| Tension force, N | 20 - 100 |
This machine is designed for unwinding cables from the drum in the technological lines of the cable production. Unwind speed is maintained with a lever compensator.
| Type | Console, no drive |
| Drum diameter, mm | 400 - 800 |
| Drum weight, kg | 600 |
| Unwinding speed, m/min | 100 |
| Tension force, N | 20 - 200 |
Adjustable braking force; Mechanical lifting and clamping of the drum.
| Type | Console, no drive |
| Drum diameter, mm | 300 - 400 |
| Drum weight with wire, kg | 170 |
| Unwinding speed, m/min | 200 |
| Tension force, N | 200 |
Pay-off machine SR 400 is intended for inertial unwinding of a wire with support of braking force. The clamping and lifting of the drum is done mechanically. The braking force is regulated by a belt brake.